safety at work – Page 9 – Risk Management 365

Powered Industrial Trucks (Forklift’s)

What are the hazards associated with operating powered industrial trucks?

There are many types of powered industrial trucks. Each type presents different operating hazards. For example, a sit-down, counterbalanced high-lift rider truck is more likely than a motorized hand truck to be involved in a falling load accident because the sit-down rider truck can lift a load much higher than a hand truck. Workplace type and conditions are also factors in hazards commonly associated with powered industrial trucks. For example, retail establishments often face greater challenges than other worksites in maintaining pedestrian safety. Beyond that, many workers can also be injured when (1) lift trucks are inadvertently driven off loading docks; (2) lifts fall between docks and an unsecured trailer; (3) they are struck by a lift truck; or (4) they fall while on elevated pallets and tines.

What can be done to reduce the hazards related to powered industrial trucks?

Determining the best way to protect workers from injury largely depends on the type of truck operated and the worksite where it is being used. Employers must ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in 29 CFR 1910.178(l)(1).

via Safety and Health Topics | Powered Industrial Trucks.

The Top 10 OSHA Violations of 2012

Most Cited Violations of 2012

1. Fall Protection (29 CFR 1926.501)

2. Hazard Communication (29 CFR 1910.1200) (mainly due to lack of training, labeling fail, access to MSDSs and lacking correct MSDSs)

3. Scaffolding (29 CFR 1926.451) – (Big problem, people using scaffoldings as ladders and ladders as scaffolding, assuming one could work for the other.)

4. Respiratory Protection (1910.134)

5. Ladders (1926.1053)

6. Machine Guarding – General Requirement (29 CFR 1910.212)

7. Powered Industrial Trucks (29 CFR 1910.178)

8. Electrical – Wiring Methods (29 CFR 1910.305)

9. Control of Hazardous Energy – Lockout/Tagout (1910.147)

10.Electrical – General (29 CFR 1910.303)

via The Top 10 OSHA Violations of 2012.

Safety at Work:Reporting Near-miss and Close-calls

How reporting close calls can prevent future incidents

Incidents occur every day at the workplace that could result in a serious injury or damage.
A near-miss program may help prevent future incidents.
One problem that companies face with near-miss programs is employees’ fear of being blamed after reporting a near miss.
Employers need to make the process of reporting a near miss as easy as possible.

via How reporting close calls can prevent future incidents.

Construction Industry | Preventing Backovers

A backover incident occurs when a backing vehicle strikes a worker who is standing, walking, or kneeling behind the vehicle. These incidents can be prevented. According to the Bureau of Labor Statistics, over 70 workers died from backover incidents in 2011.

via Construction Industry | Preventing Backovers.

Deepwater Horizon Oil Spill and Human Error

The Deepwater Horizon Oil Spill, the largest accidental marine oil spill in history, was most likely caused by human error, cost cutting and an insufficient safety system.

BP’s head of safety admits human error over oil spill. A pressure test which would have revealed problems in the drill “was incorrectly deemed a success by BP and Transocean rig personnel”, he said. And on three occasions, real-time monitoring data from the rig indicated that pipe pressure had increased, when it should have dropped. These indicators went “unobserved or unrecognized” for about 40 minutes, which “significantly shortened” the workers’ emergency response time.

via BP’s head of safety admits human error over oil spill – environment – 27 September 2010 – New Scientist.

What can you do to avoid falling at work?

You can reduce the risk of slipping on wet flooring by:

taking your time and paying attention to where you are going
adjusting your stride to a pace that is suitable for the walking surface and the tasks you are doing
walking with the feet pointed slightly outward
making wide turns at corners

You can reduce the risk of tripping by:

keeping walking areas clear from clutter or obstructions
keeping flooring in good conditon
always using installed light sources that provide sufficient light for your tasks
using a flashlight if you enter a dark room where there is no light
ensuring that things you are carrying or pushing do not prevent you from seeing any obstructions, spills, etc.

via Prevention of Slips, Trips and Falls : OSH Answers.

Health Care Workers – Hazards on the Job

Healthcare is the fastest-growing sector of the U.S. economy, employing over 18 million workers. Women represent nearly 80% of the healthcare work force. Health care workers face a wide range of hazards on the job, including needlestick injuries, back injuries, latex allergy, violence, and stress. Although it is possible to prevent or reduce healthcare worker exposure to these hazards, healthcare workers continue to experience injuries and illnesses in the workplace. Cases of nonfatal occupational injury and illness among to healthcare workers are among the highest of any industry sector. By contrast, two of the most hazardous industries, agriculture and construction, are safer today than they were a decade ago.

via CDC – Health Care Workers – NIOSH Workplace Safety and Health Topic.

Fertilizer Plant Explosion – What is Anhydrous Ammonia? –

“Our thoughts and prayers go out to those that were killed and injured in the fertilizer plant explosion in Texas. Some of those were firefighters. We must never take our firefighters and first responders for granted as they risk their lives everyday on our behalf. “ -Randy Boss

Firefighters at the scene of a massive fertilizer plant explosion in Texas were concerned Wednesday night about anhydrous ammonia. According to the Centers for Disease Control and Prevention, anhydrous ammonia is a pungent gas with suffocating fumes that is used as a fertilizer. When exposed to humans, it can cause various problems:

Anhydrous means without water
Anhydrous ammonia can rapidly cause dehydration and severe burns if it combines with water in the body
Symptoms can include breathing difficulty; irritation of the eyes, nose or throat; burns or blisters.
Exposure to high concentrations can lead to death.
Victims require treatment with large quantities of water for at least 15 minutes
It must be stored at high pressure, according to the University of Minnesota.
It is a low-cost, highly effective nitrogen-based fertilizer, the University of Arkansas said.
It is one part nitrogen and three parts hydrogen.
When released, the vapors initially move close to the ground, causing greater risk for exposure.

via What is anhydrous ammonia? – CNN.com.

Creating a Safety Culture

Why do you want a strong safety culture?

It has been observed at the OSHA VPP sites and confirmed by independent research that developing strong safety cultures have the single greatest impact on accident reduction of any process. It is for this single reason that developing these cultures should be top priority for all managers and supervisors.

What is a safety culture – how will it impact my company?

Safety cultures consist of shared beliefs, practices, and attitudes that exist at an establishment. Culture is the atmosphere created by those beliefs, attitudes, etc., which shape our behavior. An organizations safety culture is the result of a number of factors such as:

Management and employee norms, assumptions and beliefs;
Management and employee attitudes;
Values, myths, stories;
Policies and procedures;
Supervisor priorities, responsibilities and accountability;
Production and bottom line pressures vs. quality issues;
Actions or lack of action to correct unsafe behaviors;
Employee training and motivation; and
Employee involvement or “buy-in.”

via Safety and Health Management Systems eTool | Module 4: Creating Change – Safety and Health Program Management: Fact Sheets: Creating a Safety Culture.

Danger – Confined Space

Many workplaces contain spaces that are considered “confined” because their configurations hinder the activities of employees who must enter, work in, and exit them. A confined space has limited or restricted means for entry or exit, and it is not designed for continuous employee occupancy. Confined spaces include, but are not limited to underground vaults, tanks, storage bins, manholes, pits, silos, process vessels, and pipelines. OSHA uses the term “permit-required confined space” (permit space) to describe a confined space that has one or more of the following characteristics: contains or has the potential to contain a hazardous atmosphere; contains a material that has the potential to engulf an entrant; has walls that converge inward or floors that slope downward and taper into a smaller area which could trap or asphyxiate an entrant; or contains any other recognized safety or health hazard, such as unguarded machinery, exposed live wires, or heat stress.

via Safety and Health Topics | Confined Spaces.