Category: Risk Management

Workplace Safety – Accident/Incident/Near Miss Investigation

One of the best ways to avoid further accidents is to understand how an accident occurred and how to avoid that type of accident in the future. The accident investigation is a tool. The goal is not to lay blame. The goal in an accident investigation is to:

  • Satisfy legal requirements (National Institute for Occupational Safety and Health? NIOSH, and Occupational Safety and Health Administration?OSHA)
  • Find out what happened and determine immediate and underlying or root causes.
  • Rethink the safety hazard.
  • Introduce ways to prevent a reoccurrence
  • Establish training needs.
  • An accident, a near miss and an incident should all be investigated.
  • Accident investigations are a tool for uncovering hazards that either were missed earlier or require new controls (policies, procedures or personal protective equipment).
  • Near-miss reporting and investigation identify and control safety or health hazards before they cause a more serious incident.
  • Incident investigations should focus on prevention.

ACCIDENT — an undesired event or sequence of events causing injury, ill-health or property damage.

NEAR MISS — near misses describe incidents where, given a slight shift in time or distance, injury, ill-health or damage easily could have occurred, but didn’t.

INCIDENT — an incident is an unplanned, undesired event that hinders completion of a task and may cause injury or other damage.

via Workplace Safety Toolkit.

Making the Business Case for Safety and Health

In addition to their social costs, workplace injuries and illnesses have a major impact on an employer’s bottom line. It has been estimated that employers pay almost $1 billion per week for direct workers’ compensation costs alone. The costs of workplace injuries and illnesses include direct and indirect costs. Direct costs include workers’ compensation payments, medical expenses, and costs for legal services. Examples of indirect costs include training replacement employees, accident investigation and implementation of corrective measures, lost productivity, repairs of damaged equipment and property, and costs associated with lower employee morale and absenteeism.

via Safety and Health Topics | Making the Business Case for Safety and Health – Costs.

A history of violations: One worker’s comp horror story

While each state has its own workers’ compensation laws, the basic tenet remains: the employer provides compensation and medical care for employees who are injured in the course of employment and the employee, in turn, relinquishes their right to sue.

But that security blanket began to unravel the morning of Nov. 5, 2003, when Kristi Fries, an employee at Mavrick Metal Stamping, a now closed Mancelona, Mich., auto parts supplier, reached to remove a part from a 110-ton stamping press. Her unzipped sweatshirt triggered the machine’s controls, causing the press to slam down and crush her arms, resulting in the amputation of both arms between the wrist and the elbow.

via A history of violations: One worker’s comp horror story | BenefitsPro.

Machine Safety is Critical

Machine safety is critical for worker safety, because machines have many ways to injure workers: Many machines have moving parts, sharp edges, and hot surfaces with the potential to cause severe workplace injuries such as crushed fingers or hands, amputations, burns, or blindness. Safeguards are essential for protecting workers from these preventable injuries. Any machine part, function, or process that might cause injury must be safeguarded. When the operation of a machine may result in a contact injury to the operator or others in the vicinity, the hazards must be eliminated or controlled.

via CDC – Machine Safety – NIOSH Workplace Safety and Health Topic.

Control Risk to Workers

Controlling exposures to occupational hazards is the fundamental method of protecting workers. Traditionally, a hierarchy of controls has been used as a means of determining how to implement feasible and effective controls. One representation of this hierarchy can be summarized as follows:

  • Elimination
  • Substitution
  • Engineering controls
  • Administrative controls
  • Personal protective equipment

The idea behind this hierarchy is that the control methods at the top of the list are potentially more effective and protective than those at the bottom. Following the hierarchy normally leads to the implementation of inherently safer systems, ones where the risk of illness or injury has been substantially reduced.

via CDC – Engineering Controls – NIOSH Workplace Safety and Health Topic.

Planning for an Emergency

Emergency planning is an important part of a comprehensive workplace safety program.  Taking proactive steps can reduce the social and economic costs of emergencies, criminal acts, crises, and disasters.  An effective response during an emergency depends on the quality of planning and training that occurs before a situation arises.

Dangers of Staph Infections

Staph infections are caused by staphylococcus bacteria, a type of germ commonly found on the skin or in the nose of even healthy individuals. Most of the time, these bacteria cause no problems or result in relatively minor skin infections.

But staph infections can turn deadly if the bacteria invade deeper into your body, entering your bloodstream, joints, bones, lungs or heart.

In the past, a lethal staph infection might have occurred in a person who was hospitalized or had a chronic illness or weakened immune system. Now, a growing number of otherwise healthy people are developing life-threatening staph infections. And many staph infections no longer respond to common antibiotics.

via Staph infections – MayoClinic.com.

Portable Ladder Safety

Portable ladders are one of the handiest, simplest tools we use. Because of their effectiveness, ladders are used by many different people to perform many different tasks. Although ladders are very uncomplicated, planning and care are still required to use them safely. Each year in the U.S., accidents involving ladders cause an estimated 300 deaths and 130,000 injuries requiring emergency medical attention.

via G1932 Portable Ladder Safety | University of Missouri Extension.

Lift properly to prevent back injury

No one is immune to back injury. Whether you have a strong back or have hurt your back before, it is well worth it to:

  • Stop yourself before casually picking up a light or heavy load.
  • Plan in your mind for the best way to lift what’s in front of you. This could include enlisting help from one or more people.
  • Lift and move slowly and carefully.

The time you take to use the right lifting mechanics is far less than the days, weeks, or months it can take to heal from a back injury.

via Lifting properly to prevent back injury.

OSHA – Top 10 Most Frequently Cited Standards

The following is a list of the top 10 most frequently cited standards following inspections of worksites by federal OSHA. OSHA publishes this list to alert employers about these commonly cited standards so they can take steps to find and fix recognized hazards addressed in these and other standards before OSHA shows up. Far too many preventable injuries and illnesses occur in the workplace.

  • 1926.451 – Scaffolding
  • 1926.501 – Fall Protection
  • 1910.1200 – Hazard Communication
  • 1910.134 – Respiratory Protection
  • 1910.147 – Lockout/Tagout
  • 1910.305 – Electrical, Wiring Methods
  • 1910.178 – Powered Industrial Trucks
  • 1926.1053 – Ladders
  • 1910.303 – Electrical, General Requirements
  • 1910.212 – Machine Guarding

via Top 10 Most Frequently Cited Standards.